Air Canon Smoke Ring

Playing with an air canon is always fun.

You can use it to propel little tissue balls with it

You can also have a race to see who can make the balls fly the farthest.

You can also make a smoke ring with it.

Air canon moves the air.

It’s normally hard to see how air moves, but in this experiment, you can.

In this experiment, you can see how air flies out of the air canon and study the motion of air.

Air Canon Smoke Bubble Science Experiment

Air Canon Smoke Ring

Prep Time: 30 minutes
Active Time: 50 minutes
Total Time: 1 hour 20 minutes

Let's make a air canon smoke ring!

Warning: adult supervision is required whenever you do things involving fire.

Materials

  • a plastic bottle
  • a balloon
  • incense
  • a lighter or matches

Tools

  • scissors
  • packing tape
  • Adult supervision

Instructions

  1. Cut out the bottom of the bottle. Make sure the cut edges are smooth so that they don't poke through and break the balloon.
  2. Tie a knot at the opening of the balloon (no inflating). This will be the trigger.
  3. Then cut off about half an inch at the other end of the balloon.
  4. Stretch the cut end of the balloon and cover it over the cut bottom of the bottle.
  5. Tape the balloon onto the bottle so that it doesn't slip off when you pull the knot out.steps 1-5

Propelling Game

  1. To play, pull out the knot and release it quickly to shoot air at small balls of tissue paper. See how far they can fly.
  2. Try to "fire at" the tissue balls from different distances and see how far they go.
  3. Use bottles of different sizes to see if there is any difference.use Air Canon to fire at the tissue balls

Smoke Ring

  1. To make a smoke ring, light an incense and blow out the fire (since we only want the smoke).
  2. Carefully insert the incense into the bottle but do not let go. Make sure the tip does not touch and melt the bottle.
  3. Cover the mouth of the bottle with your hand while holding the incense inside for the smoke to build up. put lit incense into the air canon bottle
  4. When the bottle is filled with smoke, uncover the bottle and remove the incense.
  5. Now, in a lightly lit room, tab the balloon membrane gently and you will see a ring of smoke come out. It is easiest to see against a dark background.

Did you try this project?

Follow us on Pinterest and share a photo!

How does the air move? In this experiment, you can see how air flies out of the bottle by watching the smoke.

Why

The smoke ring you see is a vortex. It is a ring of air (and smoke) similar to rings sometimes blown by adept cigarette smokers (Note: this is not an encouragement or endorsement of cigarettes smoking at all. As you can see, you can generate this cool physical phenomenon without smoking a single cigarette!)

A vortex is a spinning donut of air. The air near the center of the donut rolls out from the center to the edge. This is because the air leaving the bottle at the center of the opening is traveling faster than the air leaving near the edge of the hole.

At the same time, this outcoming vortex is traveling faster than the outside air and therefore has a lower pressure (as depicted by Bernoulli’s principle). The resulting inward pressure from the surrounding air holds the ring shape together. As the ring travels, air friction slows it down and eventually it blends with the surrounding air and the smoke ring appears to have drifted away.

Finished air canon maker in hand. The produced smoke ring.

Similar Posts